INDX 900e Endüstriyel X Ray Film İşleme Makinaları

Technical Specifications

Processing applications: common used IndustrialX-Ray films

Film thickness: min. 0,10 mm

Material width: min. 6 cm (2.36") - max. 36 cm (14")

Material length: min. 10 cm (4")

processing capacity 13cm/min@100 sec DevTime

TimeinDeveloper: min.30 sec  max. 150 sec

Intake Speed:  38 cm/min   8 cm/min

Cycle Time: 2,7 min (162 sec)  13,6 min (816 sec) 

INDX 900e

Tank capacity -

Developer:  2,6 L

Fixer:  2,5 L

Wash water:  3 L

Solution heating(Fix and DEV):

variable in a range of 18°C - 43°C

(350W Inline Heater)

Dryer: warm air

Replenishment: fully automatic. replenishment is microprocessor controlled and calculated from information received from sensors measuring the width and length of material entering the processor. Replenishment cycles are variable.

power supply:  1 / N / PE~ 230V (+6% / -10%), 50Hz, 13A, 1.7KW  (alternatives are avaliable on request)

water supply: 2-way magnetic valve, with 3/4" hose connection by using a

DVGW-approved system-separating device or pipe-separating

device.

Wash water flow rate: 1,5 ltr/min when film is in process

Wash water supply pressure: 3 - 10 bar

Wash water supply: filtered at a temperature of 10°C - 15°C

INDX 900e

Weight: Empty  58 kg

With solution 66 kg

Dökümanı İndir

Technical Specifications

Processing applications: common used IndustrialX-Ray films

Film thickness: min. 0,10 mm

Material width: min. 6 cm (2.36") - max. 36 cm (14")

Material length: min. 10 cm (4")

processing capacity 13cm/min@100 sec DevTime

TimeinDeveloper: min.30 sec  max. 150 sec

Intake Speed:  38 cm/min   8 cm/min

Cycle Time: 2,7 min (162 sec)  13,6 min (816 sec) 

INDX 900e

Tank capacity -

Developer:  2,6 L

Fixer:  2,5 L

Wash water:  3 L

Solution heating(Fix and DEV):

variable in a range of 18°C - 43°C

(350W Inline Heater)

Dryer: warm air

Replenishment: fully automatic. replenishment is microprocessor controlled and calculated from information received from sensors measuring the width and length of material entering the processor. Replenishment cycles are variable.

power supply:  1 / N / PE~ 230V (+6% / -10%), 50Hz, 13A, 1.7KW  (alternatives are avaliable on request)

water supply: 2-way magnetic valve, with 3/4" hose connection by using a

DVGW-approved system-separating device or pipe-separating

device.

Wash water flow rate: 1,5 ltr/min when film is in process

Wash water supply pressure: 3 - 10 bar

Wash water supply: filtered at a temperature of 10°C - 15°C

INDX 900e

Weight: Empty  58 kg

With solution 66 kg